Installation guide

How to Check your Installation
1.3.2 How to Check your Installation
To check if you have properly installed your ACR38 smart card reader, you can either make use ACS
Diagnostic Tool – QuickView or the Device Manager in MS Windows to check the status.
A. Using ACS Diagnostic Tool - QuickView
ACS QuickView is available at the ACS Card Utility/Tool Download website, http://www.acs.com.hk/CU.asp.
Connect the ACR38, ACR38T or ACR38DT to your PC.
Run QuickView.exe. Click “Initialize” to start the driver
diagnosis.
If the ACR38 driver is successfully installed into your PC,
the name of corresponding driver (PC/SC or ACS
Synchronous) will be displayed.
QuickView is applicable for both PC/SC driver and
ACS Synchronous API Driver (Proprietary Driver)
B. Using Device Manager
Windows XP/2000 ACS Driver Installer
To start the Device Manager on Windows XP/2000, select
Start → Settings → Control Panel. Double-click on
System, click the Hardware tab, and then click the Device
Manager.
For PC/SC Driver
The Windows Device Manager should list the ACR38
Smart Card Reader device under the Smart card readers’
device type.
ACR38 Series Installation Guide Page 12 of 17
Advanced Card Systems Ltd.
Unit 1008, 10th Floor
Hongkong International Trade and Exhibition Centre
1 Trademart Drive
, Kowloon Bay, Hong Kong
Tel: [phone] Fax: [phone]
Website: www.acs.com.hk Email: [e-mail]