User manual

ACR30 - User Manual V 1.08, July 2002
 Advanced Card Systems Ltd.
Page 12 of 13
4.2 Screen Saver
4.2.1 Program Description
This application installs and registers a Screensaver module into the Windows operating
system. This module operates using both the ACOS smart card and the ACS smart card
reader. When the application is active, the system only refreshes from the Screensaver mode
if the correct smart card is inserted into the reader.
The specific card information required to deactivate the Screensaver is obtained by the
program during installation. In this respect, only the specific smart card used in the installation
can be used to deactivate the Windows Screensaver program.
4.2.2 Platform and driver
Suggested Operating System Driver
Windows 98 SE
Windows ME
Windows 2K
ACS Proprietary Driver
4.2.3 Installation
Install ACS Proprietary driver for your reader. Then,
right-click on the file, Acos_ss.scr, and choose
Install. The user will then be prompted into the
Windows Screensaver window as shown below
Step 1 : Insert the ACOS1 card
Step 2 : Right click the “ACS” icon to configure the connection
interface
Step 3 : Right click the “ACS” icon to install the program
The user needs to click on the Settings button to
setup the smart card reader and the smart card to
be used. An ACOS smart card must be inserted into
the reader so that the application can read and save the card data it needs.