User manual

ACR30 - User Manual V 1.08, July 2002
 Advanced Card Systems Ltd.
Page 10 of 13
4.1.3 Installation
The demonstration program is provided herein as an executable file. The user needs to install
the ACS smart card reader using the ACS Proprietary driver before running the program. The
user is also required to copy the file, Des.dll, into either the System directory or the directory
where the demonstration program resides.
4.1.4 Function Keys and Processes
When the program is run, the user will be prompted into the Main Menu window as shown
below.
The user is required to select the Port to which
the ACS smart card reader is connected. The
Output window on the right half of the screen
will display the APDU command and responses
for the various processes that may be invoked
for the duration of the program execution.
Connect – When the proper port is selected,
enables the rest of the Function buttons
Exit – Terminates the demonstration program
Personalize – Displays the Card Personalization window as shown below (Input boxes with
red label are required data)
Personalize Card – Formats the smart card
and writes the information provided by the user
into the card
Reset Form – Erases contents of all input
boxes in the window