ACR30 - User Manual V 1.08, July 2002 ACR30 User Manual ACR30 smart card reader/writer Advanced Card Systems Ltd. Room 302, 3/F., Shun Fat Industrial building, 17 Wang Hoi Road, Kowloon Bay,Kowloon, Hong Kong. Advanced Card Systems Ltd. Tel: 852-2796 7873 Fax: 852-2796 1286 Website: www.acs.com.hk E-mail : info@acs.com.
ACR30 - User Manual V 1.08, July 2002 Table of content 1. Introduction …………………………………………………………………………… 3 2. Technical specifications and system requirement ………………………….…. 4 3. Smart card reader installation/uninstallation by using installer……………… 5 3.1 Installation (Example : ACR30U, PCSC, Win2K)……………………………………. 5 3.2. Connection Diagrams ………………………………………………………………….. 7 3.3. Un-installation (Example : ACR30U, PCSC, Win2K) ………………………………. 8 4. Sample Applications ………………………………………………….……………… 9 4.
ACR30 - User Manual 1. V 1.08, July 2002 Introduction ACR30 Smart card reader/writer The ACS Smart Card Reader/Writer ACR30 is an interface for the communication between a computer (for example, a PC) and a smart card. Different types of smart cards have different commands and different communication protocols. This prevents in most cases the direct communication between a smart card and a computer.
ACR30 - User Manual V 1.08, July 2002 full functionalities of the reader/writer, and can be easily integrated in payphones, parking meters, vending machines, laundries, gaming machines, ATM's, sophisticated access control systems, and more. 2.
ACR30 - User Manual V 1.08, July 2002 3. Smart card reader installation/uninstallation by using installer 3.1 Installation - Example : ACR30U, PCSC, Win2K a) After the user run “setup.exe” which is located in the “AC-Kit driver directory”. This page will be shown. Click “Next” button Note: 1) Please do NOT connect the ACR30 reader with PC until the instruction by installer. b) The user should select the appropriate smart card reader from the list.
ACR30 - User Manual V 1.08, July 2002 d) Click “Next” button Note: 1) Please do NOT connect the ACR30 reader with PC until the instruction by installer. 2) For the ACS30S (PCSC), the user will be asked to select their COM port. e) Please make sure the ACS USB reader is disconnected. Click “OK” button f) Please connect the reader. Click “Yes” button for the Digital signature dialog box. Click “OK” button Advanced Card Systems Ltd.
ACR30 - User Manual V 1.08, July 2002 g) Click “Finish” button Note 1) The user may be asked for reboot the system under Win 98, Win Me platforms. 2) To ensure the PCSC driver is installed properly, the LED will be turn on when the card is inserted. 3.2. Connection Diagrams Connection diagram of USB Interface Smart Card Reader Connection diagram of RS232 Serial Interface Smart Card Reader Advanced Card Systems Ltd.
ACR30 - User Manual V 1.08, July 2002 3.3. Un-installation (Example : ACR30U, PCSC, Win2K) a) For the un-installation, the user just need to run the installer again. After the user run “setup.exe” which is located in the “AC-Kit driver directory”. This page will be shown. Click “Next” button b) The installer can detect your existing driver. Click “Next” button to remove the driver c) Re-boot the system to make sure the driver can be removed successfully.
ACR30 - User Manual V 1.08, July 2002 4. Sample Applications (available from www.acs.com.hk) All the sample applications are developed for ACOS1 MCU card only. Note: You will need to install the ACS Proprietary drivers for these applications. 4.1 ATM Demo 4.1.1 Program Description This application demonstrates the use of ACOS card as a combo ID and stored-value card with a built-in PIN-protected security access layer. The program provides a simulated Online Bank module and a simulated E-Shop module.
ACR30 - User Manual 4.1.3 V 1.08, July 2002 Installation The demonstration program is provided herein as an executable file. The user needs to install the ACS smart card reader using the ACS Proprietary driver before running the program. The user is also required to copy the file, Des.dll, into either the System directory or the directory where the demonstration program resides. 4.1.
ACR30 - User Manual V 1.08, July 2002 Go To ATM – Enables the simulated Online Bank module as shown below The smart card reader is on Wait status at this point. When a smart card is inserted, Online Bank menus will be enabled and the user can interact with the module using the function keys available. Go To E-Shop – Enables the simulated E-Shop module as shown below The user can drag the items into the window provided for items to be bought.
ACR30 - User Manual 4.2 Screen Saver 4.2.1 Program Description V 1.08, July 2002 This application installs and registers a Screensaver module into the Windows operating system. This module operates using both the ACOS smart card and the ACS smart card reader. When the application is active, the system only refreshes from the Screensaver mode if the correct smart card is inserted into the reader.
ACR30 - User Manual 4.2.4 V 1.08, July 2002 Function Keys and Processes To activate the application setting window, the user may either right-click on the program file, Acos_ss.scr, and select Configure or click on the Settings button of the Windows Screensaver window. OK – Saves application setting as displayed in the window Cancel – Disregards application setting shown in the window and reverts application settings to previous values 4.2.5 Libraries Acsr2032.dll and Winscard.dll 4.
