Installation guide

ACS Synchronous API Driver (Proprietary Driver) Installation
B. ACS Synchronous API driver (Proprietary Driver) Installation
B.1 Windows XP/2000
B.1.1 USB Interface
1. Run the “SETUP.EXE” and “ the “Proprietary Driver
Installation Wizard” window will open, click “INSTALL”.
To check the driver version or read installation tips, click
on “VIEW README”.
For ACR30U, ACF30U, ACT30, ACK30U, and ACR30D
2. When prompted whether you want to install the
drivers, click “Yes”.
3. Please disconnect the reader from your PC if you
haven’t done so.
Then click “OK”.
4. Connect the ACR30 device into an available USB
port. The Found New Hardware dialog will appear at the
bottom right corner. Do NOT click “OK” until the dialog
disappears.
Please see Appendix A for detailed USB Interface
Connection Diagram.
ACR30 Series Installation Guide Page 9 of 28
Advanced Card Systems Ltd.
Unit 1008, 10th Floor
Hongkong International Trade and Exhibition Centre
1 Trademart Drive
, Kowloon Bay, Hong Kong
Tel: [phone] Fax: [phone]
Website: www.acs.com.hk Email: [e-mail]