Installation guide

Connection Diagram - Serial Interface
Scheme 4:
USB reader, using one extension cable coming out
from the back of PC
One extension cable is required:
•
•
•
A cable with an “USB Plug A” on the one side while
the other side is connected to an “USB Plug B”.
Wiring Procedures
1. Firstly, connect the USB Plug A of the flat cable into
the USB Socket A on the PCB of the reader.
2. Secondly, let the USB Plug B go through the slot
hole of the PC Chassis.
3. Finally, connect the USB Plug B of the extension
cable to any unused USB Port externally.
Scheme 5:
USB reader, cable linked to a metal panel, another
cable linked to the USB port.
Two extension cables are required:
A cable with a “USB Plug A” on the one side while
the other side is connected to a “USB Socket B
with metal panel”.
A USB extension cable “USB Plug B to USB Plug
B”
Wiring Procedures:
1. First, connect the USB Plug A of the cable into the
USB Socket A on the PCB of the reader.
2. Second, fix the “USB Socket B with metal panel”
on the slot hole of the PC Chassis.
3. Finally, connect any unused USB Port and the “USB
Socket B with metal panel fixed on the PC
Chassis” together with the “USB extension cable”.
2.
3.
1.
3.
2. 1.
ACR30 Series Installation Guide Page 27 of 28
Advanced Card Systems Ltd.
Unit 1008, 10th Floor
Hongkong International Trade and Exhibition Centre
1 Trademart Drive
, Kowloon Bay, Hong Kong
Tel: [phone] Fax: [phone]
Website: www.acs.com.hk Email: [e-mail]