User's Guide

2
**Warning:
*Please insert the battery with the correct position according to the instruction
labeled on the mouse.
Step 5: If you need to travel with your wireless mouse, made sure you turn off the POWER SWITCH.
Setup the Connection between the Receiver and the Mouse
1. Insert the battery into the mouse, then follow the step below.
2. In the meantime, to open the battery cover, take the Nano receiver
out.
3. Plug the Nano receiver into the USB port on your computer.
4. When low battery, the battery indicator on the mouse will start to blink.
*Mouse Indicator
LED Blinks for 10 sec.
Low Battery Warning
LED is on for 10 sec.
Power ON
LED Indicator