2.
System Requirements ＊USB Port: Windows 7, Windows 8 or up, Mac OS X 10.8 or up. ＊Bluetooth Smart: Windows 8 or up, Mac OS X 10.10 or up. ＊Support Android device 4.4v or up, Window device with Bluetooth 4.0(LE) or up. ＊Note mouse connectivity thru Bluetooth varies on supported Android device version. BUTTONS 1. Left button 2. Right button 3. Scrolling Wheel 4. Forward 5. Backward 6. Hyper Scrolling Switch Key 7. LED Indicator 8. 2.4G Nano Receiver 9. Battery Cover 10. Connect Button 11. Switch mode:OFF/2.
SETUP 2.4GHz WIRELESS MOUSE Step 1: Take off the battery cover off. Step 2: Insert the batteries as shown inside the battery storage. Step 3: Replace the battery cover. Step 4: Switch ON to 2.4GHz mode. Step 5: Insert the NANO RECEIVER into your computer. Step 6: Your mouse will connect automatically, letting you use your mouse wirelessly.
SETUP BLUETOOTH MOUSE Windows 8 or up 1. Switch the mouse to Bluetooth mode. 2. Press the “window” button to get into Computer. 3. Click the Bluetooth icon on the task bar and then click “Add a Bluetooth Device”. 4. Get into PC Setting.
. To click “Add a device” then select “BLE Wireless Mouse”. 6. Press the CONNECT BUTTON on the underside of the mouse. 7. Selected setting will show paired or connected when pairing success.
MAC 1. Switch the mouse to Bluetooth mode. 2. Click the Bluetooth icon on your desktop or in the system bar, then select “Turn Bluetooth On”. 3. Select “ Set up Bluetooth device”. 4. The “Bluetooth Setup Assistant tab” would appear. Please follow the instructions and click “continue”. 5. Select “Mouse” then click “continue” .your mouse needs to be in “discovery” mode to be detected, therefore while the computer is searching for the mouse press the “connect” button on the bottom of the mouse.
6. Select the specific mouse then press ”continue”. 7. Press the CONNECT BUTTON on the underside of the mouse. 8. The computer is pairing with the mouse. Press “continue”. 9. Your Bluetooth mouse is setup click “Quit” to exit the tab.
Android Tablet 1. Switch the mouse to Bluetooth mode. 2. Click the setting icon on your Android tablet. 3. Turn on Bluetooth setting on your tablet. 4. Press and hold the connect button on mouse for approximately 3 second. 5. Select “BLE Wireless Mouse” from available device list.
6. Press the CONNECT BUTTON on the underside of the mouse. 7. Selected setting will show paired or connected when pairing success. Disconnecting Bluetooth mouse from your computer If you would like to disconnect your Bluetooth mouse, just open the Bluetooth devices control panel and delete the pairing for the mouse. Establishing a Bluetooth Connection The Bluetooth mouse can work in 4.0 Bluetooth environment.
WIRELESS CONNECTION BETWEEN WIRELESS BLUETOOTH MOUSE TO COMPUTER OR ANDROID TABLET If your wireless mouse has not been connected to your computer or Android tablet after completing the previous steps, the following information will help you to complete the connection.. 1. Make sure the computer or Android tablet is on. 2. Switch the mouse to 2.4GHz or Bluetooth mode. 3. 2.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
11
