Model No: PRB / PRC 2.4G Hall Presenter USER'S GUIDE Ver.:1.00 Please DO NOT direct the laser beam at anyone’s eye.
Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Installing the Batteries (Supplied) *Insert batteries to the correct polarities *Sliding the battery cover off ˙Open the battery compartment by pressing down the cover latch and sliding the door off the presenter. ˙Insert the two supplied AAA batteries (included in the package) to the battery slots. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment. ˙Close the battery cover back into position.
˙Connect the USB receiver dongle to an available USB port on your computer. Wait for the computer to go through its default process of recognizing the new hardware and installing the built-in native driver. You don’t need to do anything while your computer is going through the installation of a new device.
Mouse Right Key Mouse Left Key * For pairing, please press Mouse Left & Mouse Right button for 4 seconds. Using the Presenter Laser Beam Mouse Left Key Mouse Right Key Cursor Hall Point ON/OFF Switch Backward Forward Esc/F5 Dark Screen Laser Beam Switch 1. Pairing LED Indicator 2. Low Batter Indicator 3.
Function keys Description No. Items Description 1 Power On/OFF Main power switch 2 Scroll up/down Scroll up/down/Middle 3 Mouse Left key Mouse Left key 4 Mouse right key Mouse right key 5 Hall Point Mouse cursor control 6 Pre.
Low Battery : LED will Blink once per second.
