User's Manual

Setup the Connection between the Receiver and the Mouse

1. Insert the batteries into the mouse, then follow the steps below.

2. Plug the Nano receiver into the USB port of your computer.

3. If the mouse is not working, please put it into pairing mode.

4. Pairing: Re-plug the receiver into the USB port of your computer, then

press the connect button on the mouse. If the mouse does not work

after 10 seconds, pair them again. (The receiver has auto pairing

function).

5. The LED indicator on mouse flashes steadily when it is in pairing

mode and stops blinking when it is successfully paired with the

receiver.

6. When the batteries’ power of the mouse is low, the Low Power

indicator will start to blink.

LED Indicator

*Mouse Indicator

LED Blinks for 10 sec.

Low Battery Warning

LED is on for 10 sec.

Power ON

LED Blinking

Pairing (LED OFF when paired or

failed after 10 sec.)