User's Manual
DPI indicator
Battery indicator
Notes:
• Your battery status shows for ve seconds after turning on your mouse or after waking it from sleep mode.
• The DPI indicator blinks for ten seconds when your batteries need to be replaced.
CLEANING YOUR MOUSE
• Wipe the mouse with a damp, lint-free cloth.
SPECIFICATIONS
Mouse:
• Dimensions (L×W×H): 4.9 ×3.3 × 1.7 in.
(12.52 × 8.4 × 4.46 cm)
• Net weight: 4.23 ± 0.18 oz. (119 ± 5 g)
• Batteries: 2 AA alkaline batteries
• Battery life: 12 months (based on average usage)
• Radio frequency: Bluetooth 3.0
• Operating distance: 33 feet (10 m)
• Rating: 3V C.C. - 10 mA
• Compatibility: Bluetooth 2.1, 3.0, 4.0, 4.1
V1 ENGLISH 17-0176
STATUS
3 LEDs
2 LEDs
1 LED
DESCRIPTION
75~100% of maximum battery
21~74% of maximum battery
5~20% of maximum battery
IMPORTANT SAFETY INFORMATION
• This product has no serviceable parts. Use of controls or adjustments of procedures other than this guide may
result in danger.
CAUTION: To use this product properly, please read this guide before installing.
TROUBLESHOOTING
My mouse is not working.
• Make sure that the battery is installed correctly and that the switch is turned ON. Replace the battery if it still
does not work.
• Move your mouse closer to your computer.
• Make sure that your computer meets the system requirements.
• Make sure that your mouse is paired by pressing the connect button on the bottom of your mouse, then pair it
with your computer.
• Make sure that the Bluetooth function on your computer or Bluetooth receiver is working.
• Un-pair your mouse from your computer, then re-pair it.
The screen cursor does not move properly.
If your screen cursor lags behind the movement, then your Bluetooth connection may not be able to transmit all of
the data from the mouse with the necessary speed. This may be caused by interference from other radio sources,
obstructions in the radio wave path, excessive distance from the computer, or a combination of the above.
• Remove any metallic objects from the line of sight between your computer and the Bluetooth mouse.
• If you are using a computer with a built-in Bluetooth antenna, try reorienting the computer until you get a
better data rate.
• If you are using a Bluetooth dongle, use a USB extension cable and place the Bluetooth dongle onto your
desktop or somewhere in sight of your Bluetooth mouse.
• Move the mouse closer to your Bluetooth dongle.
• Turn o the mouse, and then turn it on again for a better connection.
• Disconnect any Bluetooth audio devices, such as headsets, that may be connected to your computer.
• Switch o any other devices operating in the 2.4 GHz radio spectrum, such as a Wi-Fi network or mobile
telephone, or move their antennas further away from your computer.
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution
Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent form that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled
environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un
environnement non contrôlé.
Nano receiver:
• Dimensions (L×W×H): 0.74 × 0.57 × 0.25 in.
(1.89 × 1.45 × 0.63 cm)
• Weight: 0.17 oz. (.005 kg)
• Interface: USB 1.1, 2.0, 3.0
ONE-YEAR LIMITED WARRANTY
CONTACT PLATINUM
For customer service, call 1-800-499-3964
The Pt logo is a registered trademark of Best Buy.
PLATINUM is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
FUNCTION
Power ON
Pairing
Low battery
DPI switched
DESCRIPTION
LED is on for 10 seconds
LED blinks (turns o when paired or if pairing fails after 10 minutes)
LED blinks for ten seconds
Bright: 1600 DPI
Dim: 1200 DPI
O: 800 DPI
PT-PNMBL8BK_17-0176_QSG_V1_EN.ai 2 3/28/2017 3:05:46 PMPT-PNMBL8BK_17-0176_QSG_V1_EN.ai 2 3/28/2017 3:05:46 PM