User's Manual

Setup the Mouse

1. Insert the battery into the mouse, then follow the steps below.

2. In the meantime, to open the mouse under the cover, take the nano

receiver out.

3. Then press the connect button on the mouse. If the mouse does not

work after 10 seconds, pair them again.

4. The LED indicator on mouse flashes steadily when it is in pairing

mode and stops blinking when it is successfully paired with the

receiver.

7. When low battery, the battery indicator on the mouse will start to blink.

*LED Indicator

LED is on for 3 sec.

Power ON

LED Blinks for 3 times

During Pairing (LED OFF when

paired or failed after 10 sec.)

LED Blinks for 10 sec.

Low Battery Warning

LED Indicator