User's Manual

Mouse Utility
Getting Ready
Welcome
Your mouse uses a newly developed optical sensor that replaces the traditional
mouse ball and uses radio technology to communicate with your computer.
The
optical sensor accurately scans the surface of your de
sktop many times per second
for smooth and fast cursor tracking on your computer screen. And the
digital radio
technology does not require line -of-sight placement and usage.
Your mouse also
come with a wheel, which functions both as a wheel and as a button.
Getting Ready
Installing the Batteries
Step 1 Remove the battery compartment
cover on the bottom of the mouse
by squeezing the cover in from
the tab to release it.
Step 2 Insert the batteries as shown
inside
the battery compartment.
Step 3 Replace the cover.
1
Software Installation
Please follow the following steps to install your mouse driver :
1. Insert your driver disk into the floppy driver.
2. Go to “Start” Menu and select “Run”.
3. Type “A:\Setup” then press the “Enter” button on your keyboard.
4. Follo
w the instruction on screen, then system will install the Driver
automatically.
5. Reboot your system while completing the installation process.
Mouse Utility
Double click the mouse icon on the right-
bottom
corner of the Windows screen. Then the following
window will open.
For more detail description, please review the
each item as below :
Wheel Setting :
Wheel Mode
1. Choose “ System Default Mode “to be
compatible with Intelli-Mouse functions.
2. Choose “ Enhance Scroll Mode “to
support the new useful functions of 8D
Scroll Ball Mouse.
Low Battery Indicator
Low Battery Indicator on bottom
of the
mouse will flash / lit-on if the battery is low
.
Replace battery if the Low Battery Indicator is lit on.
It is recommended that you use alkaline batteries
when you change
batteries to optimize
performance. You may use other battery types,
but
do not mix them with alkaline .
l
To scroll, simply move the wheel .
l To use the wheel like a standard mouse
button.
click (press down) the wheel
Caution : If your tabletop surface is in red color, transparent as glass or highly
reflective like a mirror, your tabletop surface may be interfering with the
optical sensor of the mouse, Try using a mouse pad, or use the mouse
on a different tabletop surface.
Please check the following contents of your Cordless Optical Wheel Mouse
1 x Cordless Optical Wheel Mouse
1X User’s Manual
1X Driver Disk
1 x Receiver,
2 x AA A alkaline Batteries
Advanced Human Body Detect Technology
Your mouse come with advanced human body detect sensor
which can detect the hand touch on the mouse.
The sensor
is on both left and right side of the mouse when your hand
close to or touch the sensor area, mouse works immediately
.
And when your hand move off the mouse over 2 seconds,
Mouse will enter sleep mode for power saving
CAUTION : mouse can not work if your hand does
not touch sensor area.
4
Low Battery
Indicator
Caution :
For saving the batty power, the Mouse will automatically suspend
after you stop operating the mouse for a period of time. To wake up
the mouse, please press the anyone buttons on the mouse.
Left Sensor Area
Right Sensor Area