User Manual

6. Turn on your computer and start your Operating System.

7. Place your Wireless Optical Mouse within 3 feet (approximately 1

meter) of the receiver for optimal communication.

8. Move the mouse to ensure there is a good connection.

Note 1: After a period of inactivity, the Wireless Optical Mouse goes

into sleep mode to save batteries. To wake the mouse, press any

mouse button.

Note 2: The low battery LED will illuminate when the batteries are

low and need to be changed.

Note 3: Optical mice do not work well on glass or highly reflective

surfaces. If your mouse does not work properly, try a different

surface such as a plain white piece of paper.