Mini 3D RF Optical Mouse (MS8+MR3) OWNER'S GUIDE CAUTION : To use this product properly, please read the user's guide before installation
Welcome The mini Rf optical mouse uses the digital radio technology as a convenient wireless application. It combines a newly developed optical sensor that replaces the traditional mouse ball and improves your working efficiency. However, the compact receiver and the wireless mouse provide you the best way to work with your notebook. Federal Communications Commission (FCC) Notice This device complies with Part 15 of the FCC rules.
Installing the batteries Step 1 Press the tag on the bottom-end of mouse and pull the slide cover backward to remove the battery compartment cover. Step 2 Insert the batteries as shown inside the battery compartment. Step 3 Replace the cover. Install the Receiver The Cordless Mouse uses digital radio technology Communication between the mouse and your computer is achieved with great reliability using radio waves.
Setup the connection Rf channel between the Mouse and the Receiver 1. 2. Press the ID Switch button on the Mouse Press the ID Switch button on the bottom of the Receiver If the mouse cursor does not move after 30 seconds, do above steps again. Push 1 Push 2 Caution: If you had completed the connection successfully, The LED on the receiver will be flash several times. If the ID Setting is not properly, please re set your ID again by following the above steps.
LED FLASH 0.5 sec. Regularly SEARCHING the channel LED FLASH if any action Channel connected LED ON No action Using your mouse How to use the wheel Your mouse has a wheel that functions both as a wheel for Windows Scrolling and also as a customized button. It can be used as a standard mouse button, click (press down) the wheel. To Use the Middle Button, Directly Press down the Wheel. For scrolling the screen, simply move the wheel.
Utility The Mouse Utility provides you an easy way to customize the mouse operations. It will load into your system automatically after finishing the driver Installation. Double click the mouse icon on the right-bottom corner of the Windows screen for utility setting up. Wheel Setting: 1. Choose “ System Default Mode “ to be compatible with Intelli-Mouse functions. 2. Choose “ Enhance Scroll Mode “ to support the new useful functions of 8D Scroll Ball Mouse.
Auto Scroll Give a fixed movement speed for horizontal and Vertical scrolling. Control (Office Zoom) As holding the “Ctrl“ Key of the keyboard by pressing down the scroll button. Shift As holding the “Shift“ Key of the keyboard by pressing down the scroll button. Switch to Horizontal Wheel Choose to change the Vertical Scrolling wheel mode to Horizontal Scroll mode by each pressing down the scroll button. IE Switching Backward Choose to replace the “ Back “ function by each pressing down the scroll button.
The Screen Cursors Does Not Move Properly Change the angle of your radio receiver,. Try adjusting the receiver and/or mouse to improve reception. Make sure that the battery low indicator is NOT lit on. Replace batteries if the low battery indicator is lit on. You may also need to change the channel / ID for the mouse, Press the Connect button on the receiver, then press the Connect button on the mouse.
