User Manual

10
Troubleshooting
Mouse does not work upon installation
Try one or more of the following:
z Make sure you have installed the Driver correctly.
z Make sure the receiver cable is plugged into the right mouse port.
z Unplug the Mouse and then plug in the mouse again. Make sure that Mouse had been
detected by the Operating Systems properly.
z Make sure your mouse port has the proper configuration. Refer to your computer
documentation for the correct port configuration.
z You may have other system devices (e.g. a LAN card) that conflict with your mouse.
Check the IRQ/address settings of these devices for conflicts, and change the settings as
required.
N-MP1&MR8-01