User's Manual

9
Targus Wireless Rechargeable Notebook Laser Mouse
Avoid using the mouse on a metal surface. Metals, such
as iron, aluminum or copper, shield the radio frequency
transmission and may slow down the mouse’s response
time or cause the mouse to fail temporarily.
The mouse will enter a suspend mode at the same time
your computer does. To activate the mouse press any
mouse button.
If your computer has a metal case that contains aluminum
or magnesium, use the mouse to the side. The display
panel may interfere with the radio frequency signal if you
use the mouse directly in front of the computer.
Troubleshooting
What do I do if the mouse does not work?
Make sure that the polarity of the batteries is correct. The
positive (+) and negative (-) ends of each battery must
match the positive (+) and negative (-) connections in the
battery housing.
Make sure that the batteries are fully charged. Check your
computer’s suspend mode settings, as the mouse will not
charge while the computer is in suspend mode.
Check that the receiver's USB connector is firmly
attached to the USB port on your computer.
Make sure you have established a wireless link between
the mouse and its receiver. See “Synchronization” on
page 7.