User's Manual

Troubleshooting

Mouse does not work upon installation

Try one or more of the following:



For optimal performance, place adjust the angle of the receiver to

find the best performance.



Make sure you have installed the batteries correctly.



If you are working on a metallic surface, try using a mouse pad and

turning the receiver on its side for better reception



Press the CONNECT button on the receiver, then press the

Connect button on the mouse.

Mouse not detected

When using the mouse, it may not be detected by the

computer, To remedy this problem, try the following



Make sure the receiver is plugged into the right mouse

port.



Make sure your mouse port has the proper

configuration. Refer to your computer documentation

for the correct port configuration.



You may have other system devices (e.g. a LAN card)

that conflict with your mouse. Check the IRQ/address

settings of these devices for conflicts, and change the

settings as required.