User's Manual

Targus Wireless Rechargeable Mini Optical Mouse

Charging the Batteries

For best results, you should charge the mouse at least 4

hours before using it. You can do this via the supplied USB

charge cable. To do this:

1 Connect the cable’s USB connector into an available

USB port on your computer

2 Connect the other end to the mouse.

NOTE: To continuously charge the mouse via the USB

charge cable, your computer must be on and awake.

For best results, turn off your computer’s power

management feature while charging the mouse.

Establishing a Communications

Link

The mouse has 256 identification codes that allow the

mouse and its receiver to operate without interference from

other radio frequency devices.

After your computer detects the USB receiver and the

driver is installed, you must establish a communications link

between the mouse and its receiver BEFORE you can use

the mouse. To do this, follow the instructions below:

1 Press and release the link button located on the bottom

of the receiver.