User's Manual

Setup the Connection between the Receiver and the Mouse,

Keyboard.

1. Plug the RF receiver into the USB port of your computer.

2. Insert the batteries into the keyboard, then follow the steps below.

3. If the keyboard is not working, please put them into pairing mode.

4. Pairing: Re-plug the receiver into the USB port of your computer, then

press connect button of the keyboard. If the keyboard does not work

after 10 seconds, pair them again. (The receiver has auto pairing

function).

5.The LED indicators on receiver flashes when the keyboard is in use.

6. When the batteries of the keyboard is low, the Low Power indicator

will start to blink.

LED indicator

Power ON

*Keyboard Indicator

Red LED is on for 10 sec.

Red LED Blinking

Pairing (LED OFF when paired or

failed after 10 sec.)

Red LED Blinks for 10 sec.

Low Battery Warning