User's Manual

from babies and children.
 Don’t try to remove the cover or the back – there are no user-serviceable parts,
and you don’t want to risk an electric shock.
NOTE: Any unauthorized changes or modifications to this equipment render the
manufacturer’s warranty null and void.
Amplifier Connections
 Before connecting anything to or from your SOLIS, switch off the power to the
SOLIS and to components you want to connect.
 Make sure that all connections between the SOLIS and other components are
made correctly, so L(left) goes to L, R(right) goes to R, + to + and – to -> Don’t
forget to refer to owner’s manual of each component that you want to connect.
 Always turn OFF the power switches when you’re connecting or disconnecting
from the mains.
 Disconnect the power supply from the mains if you’re not planning to use your
SOLIS for a while eg holidays.
 Any speakers you connect should have an impedance of 4 ~ 8 ohms, if it’s not
written on the back of the speaker, check with the distributor.
Speaker Connections
 Connect to your speakers using high quality, bare (stripped) speaker wire. If your
speaker wires are not connected properly you may hear no sound at all, or if the
wires are mixed up, it will sound weird with a disturbing loss of bass.
 When using bare speaker wires, fit at least 1.6mm of insulation inside the speaker
terminals so that there’s no bare wire showing.
 Made sure the wire holders are firmly screwed in to stop the wires from
becoming loose. If wires touch, the speakers or the unit could be damaged. That’s
bad.