User's Manual

!AcroLAN Card User’s Guide Version 20002.5

Page 15 of 38

good condition:

• AcroLAN AWL-1100P Series PCI Client Adapter

• Standard 2 dBi dipole antenna

• AWL-1100P Series software and documentation CD for Windows 95/98 Windows ME,

Windows 2000 Installing the PCI Client Adapter

If any item is damaged or missing, contact your client adapter supplier. Save all shipping

and packing material in order to repack the unit should service be required.

This section provides instructions for installing a client adapter on a computer using one

of the Windows operating systems.

Before you begin, examine the client adapter. The antenna connector and Status and

Activity LEDs will face out of your computer, and will be visible when you put the cover

back on. The bottom edge of the card is the connector you will insert into an empty

expansion slot in your computer.

4.2.1 Installing PCI Card Adapter

1. Turn off the computer and all its components.

2. Remove the computer cover.

3. Remove the screw from the top of the CPU back panel above an empty expansion

slot. This screw is used to hold the metal bracket on the back panel.

4. Tilt the client adapter to allow the antenna connector and LED lights to slip through

the opening in the CPU back panel.

5. Press the client adapter into the empty slot until its connector is firmly seated.