User's Manual

AcroLAN Access Point User’s Guide
Version 2000.12.10
Copyright© Acrowave Systems 2000 DOC – xxx - yyy
Page 39 of 39
In order to upgrade Access Point firmware via Internet, click the
Internet
selection
button. If you know an URL address that supply Access Point’s latest firmware version
then enter the address in the dialog box. Otherwise click
Default URL
button.
The Default URL addresses Acrowave Systems’ Internet homepage that supports latest
Access Point firmware version.
If you have defined URL address, press
Start
button so that the firmware can be
transferred to your local disk (Program File
#
Acrowave Systems
#
Acrowave Access
Point Manager). During the firmware down load, if there is an error or file transfer failed
then an error message will be displayed.
After complete the firmware downloading, the Manager performs Access Point
firmware upgrade process. This process can be monitored just like as firmware
download process.
Firmware Upgrade Via Internet