User's Manual

AcroLAN Access Point User’s Guide
Version 2000.12.10
Copyright© Acrowave Systems 2000 DOC – xxx - yyy
Page 23 of 23
If you use Acrowave AW-1100E as a normal Access Point, select ‘
1
’.
Otherwise, you use it as a point-to-point transmission device you should select ‘
2
’ or ‘
3
’.
About this usage, detail explanation will be followed next chapter.
If you know what IP address should be set to your Access Point then write it in this step.
Otherwise, if you do not know what IP can be used, ask for your network administrator
about available IP address. In this example, the IP address 211.189.201.251 is a default
IP address that is assigned by Acrowave Systems.
Caution
If you have a DHCP server, this step can skip
. If you have a DHCP server, your
Access Point’s IP address is assigned automatically.
!
RETURN
!
RETURN