Owner's manual

Revision: 1.0
23
10. COM1: RS232 signal
connector for port #1.
11. COM2: RS232 signal
connector for port #2.
12. SATA1: SATA device
connector #1.
PIN SETTING PIN SETTING
1 DCD #1 2 DSR #1
3 RX #1 4 RTS #1
5 TX #1 6 CTS #1
7 DTR #1 8 RI #1
9 GND 10 GND
PIN SETTING PIN SETTING
1 DCD #2 2 DSR #2
3 RX #2 4 RTS #2
5 TX #2 6 CTS #2
7 DTR #2 8 RI #2
9 GND 10 GND
SATA device connector
#1.
13. SATA2: SATA device
connector #2.
14. CN4: Audio signal
connector.
15. JP3: CF MASTER
SELECT
SATA device connector #2.
Audio line out
SET SIGNAL
SHORT MASTER
OPEN SLAVE
16. LAN1: RJ45 connector for
Gigabit Ethernet port #1.
17. LAN2: RJ45 connector for
Gigabit Ethernet port #2.
18. J6: Front panel
connector.
RJ45 connector for Gigabit
Ethernet port #1.

RJ45 connector for
Gigabit Ethernet port #2.
STATUS SETTING
1-2 Hardware reset
3-4
AT Mode - Short
ATX Mode - Open
5-6 Power Button