Owner's manual

Revision: 1.0
22
4.3 Components and Jumps Setting List
1. JP1: LCD panel driving
voltage selection.
2. ATX1: AT power input
connector.
3. BAT1: CMOS battery holder.
STATUS SETTING
1-2
+3.3V
(Default).
2-3 +5V
PIN SETTING
1 GND
2 GND
3 +12V
4 +12V
CMOS battery holder.
4. SYSFAN1: System DC
Fan connector.
5. CN2: PCI-104 connector. 6. CN3: MINI PCI-E connector.
PIN SETTING
1 GND
2 +12V
3 Fan speed data
PCI-104 connector. MINI PCI-E connector.
7. JP2: Signal SERIRQ
connects to PCI-104 pin
#B1 selection.
8. J7: COM1/2 SELECT RI OR
+12V
9. GPIO1: GPIO connector.
STATUS SETTING
Open
Disconnected.
(Default)
Short Connected.
PIN SIGNAL PIN SIGNAL
1 RI#1 2 RI#1_12V
3 +12V 4 RI#1_12V
5 RI#2 6 RI#2_12V
7 +12V 8 RI#2_12V
PIN SETTING PIN SETTING
1 GPIO0 2 +5V
3 GPIO1 4 GPIO7
5 GPIO2 6 GPIO6
7 GPIO3 8 GPIO5
9 GND 10 GPIO4