User guide

AIV-HM76V1FL Series User Manual
17
www.acrosser.com
2. Components Assembly
2.1. 2.5” SATA SSD Installation
Step 1: Loosen the two disk-tray screws by ngers.
Step 2: Pull out the disk-tray and install your 2.5” SATA disk.
Step 3: Fasten the disk with 4 screws provided in the package.
Step 4: Firmly push the disk-tray back into the disk compartment. The disk is now
connected with the system.
Step 5: Push in the disk-tray and fasten the two disk-tray screws by your screw
driver or ngers.
Step 6: Complete.