Specifications

AR-B1564 User¡¦s Guide
7-9
Reserved memory Address
This option specifies the beginning address (in hex) of the reserved memory area. The specified ROM memory
area is reserved for use by legacy ISA adapter cards.
7.7 PERIPHERAL SETUP
This section is used to configure peripheral features.
AMIBIOS SETUP - PERIPHERAL SETUP
(C) 1998 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Auto
OnBoard Serial Port1 Auto
OnBoard Serial Port2 Auto
OnBoard Serial Port3 Auto
OnBoard Serial Port4 Auto
Serial Port4 Mode Standard
IR Output MUX IRRX2/IRTX2
IR Transmission Mode Full Duplex
Receiver Polarity N/A
Transmitter Polarity N/A
OnBoard Parallel Port Auto
Parallel Port Mode Normal
EPP Version N/A
Parallel Port IRQ Auto
Parallel Port DMA Channel N/A
OnBoard PCI IDE Both
Primary Master Prefetch Enabled
Primary Slave Prefetch Enabled
Secondary Master Prefetch Enabled
Secondary Slave Prefetch Enabled
Available Options :
Auto
Disabled
Enabled
ESC:Exit ¡ô¡õ:Sel
PgUp/PgDn:Modify
F2/F3:Color
Figure 7-7 BIOS: Peripheral Setup
OnBoard FDC
This option enables the floppy drive controller on the AR-B1564.
OnBoard Serial Port
This option enables the serial port on the AR-B1564.
OnBoard Parallel Port
This option enables the parallel port on the AR-B1564.
Parallel Port Mode
This option specifies the parallel port mode. ECP and EPP are both bidirectional data transfer schemes that
adhere to the IEEE 284 specifications.
Parallel Port DMA Channel
This option is only available if the setting for the parallel Port Mode option is ECP.
OnBoard PCI MASTER/SLAVE Prefetch
This option specifies the onboard IDE controller channels that will be used.