Specifications

AR-B1564 User¡¦s Guide
6-5
Step 4:
In the WIN95 operation system, please choose the <ADDING NEW HARDWARE> icon in the
{CONTROL PANEL}. Please select the <From Disk Install> item, and type the factory source files’
path.
C:\AUW95
Step 5:
And then you can find the <ES1869 Plug and Play AudioDrive> item, select it and click the <OK>
button.
Step 6:
Finally, the installation is completed and user must reboot the system.
(3) WINNT Driver
For the WINNT4.0 and WINNT3.5 operating system, user must in the DOS mode decompress the compress file.
And then the following steps are for WINNT4.0:
Step 1:
Make the new created directory to put the audio drivers.
C:\>MD AUNT40
Step 2:
Insert the Utility Disk #4 in the floppy disk drive, and then copy the compress file—NT40DRV.ZIP,
and the PKUNZIP.EXE program—, in the new created directory.
C:\>COPY A:\AUNT40\NT40DRV.ZIP C:\AUNT40
C:\>COPY A:\UTILITY\PKUNZIP.EXE C:\AUNT40
Step 3:
Change directory to the new created directory, and extract the compress file.
C:\>CD AUNT40
C:\AUNT40>PKUNZIP -d NT40DRV.ZIP
Step 4:
In the WINNT4.0 operation system, please choose the <ADDING NEW HARDWARE> icon in the
{CONTROL PANEL}. Please select the <From Disk Install> item, and type the factory source files’
path.
C:\AUNT40
Step 5:
And then you can find the <ES1869 Plug and Play AudioDrive> item, select it and click the <OK>
button.
Step 6:
Finally, the installation is completed and user must reboot the system.
(4) DOS Driver
Step 1:
Make the new created directory to put the audio drivers.
C:\>MD AUDOS
Step 2:
Insert the Utility Disk #4 in the floppy disk drive, and then copy the compress file—DOSDRV.ZIP,
and the extract program—PKUNZIP.EXE, in the new created directory.
C:\>COPY A:\AUDIO\DOSDRV.ZIP C:\AUDOS
C:\>COPY A:\UTILITY\PKUNZIP.EXE C:\AUDOS
Step 3:
Change directory to the new created directory, and extract the compress file.
C:\>CD AUDOS
C:\AUDOS>PKUNZIP -d DOSDRV.ZIP
Step 4: In the DOS mode execute the SETUP.EXE file.
C:\AUDOS>ESS
Step 5: The screen shows the hardware configuration items for setup the base address, IRQ, DMA…etc. If
these items setting all are correct. The setup will ask the directory to install the files. The default
directory is C:\AUDIODRV, and then press the [ENTER] key the installation is completed.