Specifications

AR-B1564 User¡¦s Guide
6-2
6.2.1 VGA Driver
(1) WIN 3.1 Driver
For the WIN31 operation system, user must in the DOS mode decompress the compress file. And then as to the
steps:
Step 1: Make the new created directory to put the VGA drivers. Change directory to the new created directory
C:\>MD VGAW31
C:\>CD VGAW31
Step 2: Insert the Utility Disk #1 in the floppy disk drive, and then copy the compress file—WIN31DRV.EXE in
the new created directory, and extract the compress file.
C:\VGAW31>COPY A:\WIN31DRV.EXE C:\VGAW31
C:\VGAW31>WIN31DRV
Step 3: In WIN31 mode execute the SETUP.BAT file. It generates the SETUP MENU.
C:\VGAW31>SETUP
Step 4: The screen shows the chip type, and presses any key enter the main menu.
Step 5: Please choose the <Windows Version 3.1 (6555X accelerated drivers)>, press [ENTER] to select <All
Resolutions>. When this line appears [*], that means this item is selected. Press [End] to install.
Step 6: The screen will show the dialog box to prompt the user for the WIN31 path. The default is C:\WINDOWS.
Follow the setup steps’ messages. As completed the setup procedure will generate the message
following.
Step 7:
Installation is done!
Change to your Windows directory and type SETUP to run the Windows Setup program. Choose one of
the new drivers marked by an *. Please refer to the User’ s Guide to complete the installation.
Step 8: Press [Esc] to return the main menu, and press [Esc] to return to the DOS mode.
Step 9: In WIN31, you can find the <Chips CPL> icon located in the {CONTROL PANEL} group.
Step 10: Adjust the <Refresh Rate>, <Cursor Animation>, <Font size>, <Resolution>, and <Big Cursor>.
(2) WIN 95 Driver
For the WIN95 operation system, user must decompress the compress file in the DOS mode. And then setup step
by step:
Step 1: Make the new created directory to put the VGA drivers. Change directory to the new created directory
C:\>MD VGAW95
C:\>CD VGAW95
Step 2: Insert the Utility Disk #2 in the floppy disk drive, and then copy the compress file—WIN95DRV.EXE in
the new created directory, and extract the compress file.
C:\VGAW95>COPY A:\WIN95DRV.EXE C:\VGAW95
C:\VGAW95>WIN95DRV
Step 3: In the WIN95 operating system, please choose the <SETTING> item of the <DISPLAY> icon in the
{CONTROL PANEL}. Please select the <From Disk Install> item, and type the factory source files’ path.
C:\VGAW95
Step 4: Find the <Chips and Tech 65550 PCI > item, select and click the <OK> button.
Step 5: Finally, find the <DISPLAY> icon and the <Chips> item. You can select this item, and adjust the
<Screen Resolution>, <Refresh Rate>, <Font Size>…and other functions. Please refer to the
messages during installation.
CAUTION: If you decompress files in the newly created directory, you can find the README file, it describes detailed
installation information.