Specifications

AR-B1564 User¡¦s Guide
4-1
4. CRT/LCD FLAT PANEL DISPLAY
This chapter describes the configuration and installation procedure using LCD and CRT display. The following
topics are covered:
l CRT Connector
l LCD Flat Panel Display
l Supported LCD Panel
4.1 CRT CONNECTOR (CN13)
To connect a CRT monitor, an adapter cable has to be connected to the CN13 (10-pin header type) connector.
This adapter cable is included in your AR-B1564 package.
The AR-B1564 support CRT color monitors. AR-B1564 used onboard VGA chipset and supported 2MB on-board
VRAM. For different VGA display modes, your monitor must possess certain characteristics to display the mode
you want.
To connect to a CRT monitor, an adapter cable has to be connected to the CN13 connector. CN13 is used to
connect with a VGA monitor when you are using the on-board VGA controller as a display adapter.
CN13 is a 10-pin connector that attaches to the CRT monitor via a HD-sub 15-pin adapter cable. Pin assignments
for the CN13 & HDB15 connector is as follows:
Figure 4-1 CN13: CRT Connector
CN13 DB-15 FUNCTION CN13 DB-15 FUNCTION
1 1 Red 2 5 GND
3 2 Green 4 6 AGND
5 3 Blue 6 7 AGND
7 14 V-sync 8 8 AGND
9 13 H-sync 10 10 GND
Table 4-1 CRT Connector Assignment