Specifications

~ Page 39 ~
4-7. PERIPHERAL SETUP
This section is used to configure the peripheral features.
AMBIOS SETUP – PERIPHERAL SETUP
(C) 1999 American Mega trends, Inc. All Rights Reserved
Onboard FDC
Onboard Serial Port A
Onboard Serial Port B
Serial Port B Mode
IR Duplex Mode
IrDA Protocol
Onboard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port DMA Channel
Onboard IDE
Enabled
3F8h/COM1
2F8h/COM2
N/A
N/A
N/A
378h
Normal
N/A
N/A
Both
Available Options:
Yes
No
ESC: Exit ,-: Sel
Pg Up/Pg Dn: Modify
F2/F3: Color
BIOS: Peripheral Setup
Onboard FDC
This option enables the floppy drive controller on the AR-B1682.
Onboard Serial Port
This option enables the serial port on the AR-B1682.
IR Port support
This item is to activate the function of Infrared.
Onboard Parallel Port
This option enables the parallel port on the AR-B1682.
Parallel Port Mode
This option specifies the parallel port mode. ECP and EPP are both bi-directional data transfer schemes
that adhere to the IEEE1284 specifications.
Parallel Port DMA Channel
This option is only available if the setting for the parallel Port Mode option is ECP.
K/B Wake-Up function
This item is to set up the function of waking-up the system by Keyboard from suspend mode.
Mouse Wake-up function
This item is to set up the function of waking-up the system by Mouse from suspend mode.
Onboard IDE
This option is to set up the operating mode of IDE controller. If the main board offer the enhanced I/O port,
the choice should be <enabled>
Reset, Power, Sleep Button
These options are to activate the Reset, Power, and Sleep function in the ATX Keyboard.