Specifications

~ Page 31 ~
Wait for ‘F1’ If Error
AMIBIOS POST error messages are followed by:
Press <F1> to continue
If this option is set to Disabled, the AMIBIOS does not wait for you to press the <F1> key after an error
message.
Hit ‘DEL’ Message Display
Set this option to Disabled to prevent the following message:
Hit ‘DEL’ if you want to run setup
It will prevent the message from appearing on the first BIOS screen when the computer boots.
Internal Cache
This option specifies the caching algorithm used for the L1 internal cache memory. The settings are:
Setting Description
Disabled Neither L1 internal cache memory on the CPU or
L2 secondary cache memory is enabled.
WriteBack Use the write-back caching algorithm.
WriteThru Use the write-through caching algorithm.
Internal Cache Setting
External Cache
This option specifies the caching algorithm used for the L2 secondary cache memory. The settings are:
Setting Description
Disabled Neither L1 internal cache memory on the CPU or
L2 secondary cache memory is enabled.
WriteBack Use the write-back caching algorithm.
WriteThru Use the write-through caching algorithm.
External Cache Setting
Cache Bus ECC
This item is to set up the function of Cache Bus Error Correction Code, choose
<Enabled>
or
<Disabled>
to determine if the function is available.
System BIOS Cacheable
This item is used to activate the function of re-buffering the contents of shadow RAM from system BIOS.
The default setting is <Enable>, which will improve the speed of system.