User Manual

28
PROGRAM FUNCTION DISPLAY SHOWS
14. Scroll Up/Down to SET UP PRINTER
=PARALLEL
a. Press ENTER. SELECT PRINTER TYPE
PARALLEL
b. Use menu key to select
Parallel, Serial, or none.
c. Press ENTER Parallel
enter to confirm
d. Press ENTER. SET UP PRINTER
The unit beeps twice. = PARALLEL
NOTE: If you select a serial printer, the comm port baud rate must be set.
Skip this step if you have selected parallel printer.
15. Scroll to COMM PORT BAUD RATE
=9600
a. Press ENTER SELECT BAUD RATE
=9600
(example)
b. Use menu to scroll
through Baud Rates.
c. Press ENTER 9600
enter to confirm
d. Press ENTER. COMM PORT BAUD RATE
Unit beeps twice. =9600
(example)
16. REMOVE ALL PUNCHES: Removes all employee punch
information while leaving the setup, shift rules and employee
profiles at their current setting.
17. RE-INITIALIZE SYSTEM: Will CLEAR ALL punches and
employee profiles and resets all Setup and Shift Rules to their
factory settings.
Functions