user manual
14-13
1.Remove one screws.(14-3)
2. Re move platen bearing whirl stop screw from the right.(14-4ǃ14-5)
3.Remove the LF gear and the motor gear and two screws to pull out th e motor
A.(14-6ǃ14-7ǃ14-8ǃ14-9)
3.Remove the lead screw assemble b y hand.(14-10ǃ14-11)
4.Turn the lead screw top to match up the projection on it with the notch in the carrier.
Pull the lead screw top below the carrier. ˄14-12ǃ14-13˅