User manual

Page 2
 The clock may be placed upright on a solid surface or
mounted to a wall with mounting screws. Use the enclosed
template & screws for wall mounting. Avoid locations where
the device will be subject to vibrations and shock such as a
slamming door.
 The clock warranty does not cover defects or damages
caused by improper installation, improper storage, abuse,
ordinary wear, or unauthorized service.
Time Recorder Mode Settings
Mode
Setting
Values
Default
Value
01
Year
2000 – 2099
Year of
Mfg
02
Date
1-12 Mo, 1-31 Date
01, 01
03
Time
1-23 Hr, 0-59 Min
12 : 00
04
End of Day Change Time
1-23 Hr, 0-59 Min
00 : 00
05
Set Card Format
(Set “00” for ATR241 cards)
00: first row blank
01: prints on 1
st
row
00
06
Pay Period Type
*End Day of Wkly P.Period
Must set 07 for Wkly Card
00: Mthly, 01: Wkly
01=Mon…07=Sun
01
07
07
Clock Display Format
12 or 24 Hr
12
08
Adjust Printing Position
Max: 6mm Vert/Horiz adj.
Increase #’s to move up/right
00-15: Vertical Axis
00-30: Horiz. Axis
08,08
vert,horiz
09
DST Start Month / Date
DST Start Time
DST End Month / Date
DST End Time
1-12 Mo, 1-31 Date
00-23 Hr
1-12 Mo, 1-31 Date
00-23 Hr
00, 01
02
00, 01
02
10
Print Format
(Independent of display format)
00: 24 Hr
01: Decimal Hrs
02: 12 Hr (pm)
02
11
Time Card Recognition
Note: Turn “On” for Mthly cards
00: On, 01: Off
01
Note: Pressing “All-Reset” on the control panel will reset all
Time Recorder settings to their factory defaults.