User manual

TR4020/TR4030 (from GIGA-TMS)
Install as per the user manual.
Create C:\TR4000 folder
Download settings should be as shown above.
Saved Data Format (in Miscellaneous) should be ‘Default’
Schedule can be as per requirement.
In Interface to Post Data configuration, select TR4000 from Giga-Tms/Promag in the
Attendance Reader Interface.
While configuring the reader with master card, you can change the SHIFT KEY length. Make
sure that this is same as configured in “Interface To Post Data” configuration. Zero (0) in both
is a good choice if Shift key is not being used. On the other hand if you want to use Shift key
for reason/job, configure appropriately the reader as well as the Interface To Post.
You can also use F1/F2/F3/F4 keys to show reason for going In/Out
ADCT (from Acroprint)
ADCT communication and terminal number setting is done using the menu on the terminal
itself. It comes with a manual. The employee Ids, job and task number are uploaded into the
terminal using a utility “Acrocomm.exe” in conjunction with some configuration files. The
same utility is used for downloading attendance data to hard disk also. You simple create a
folder “C:\ADCT” and copy the files from CD to this folder. Then edit the “Download.bat”
and “Upload.bat” files to they correctly reflect the number of terminals. In addition, the
TERMnn.INI files are also setup to reflect the installation’s resources.
Part 7