Other Content

- 17 -
9. Setting Alarm Schedules (Mode b002)
You may set up to 25 Alarms (01 thru 25) to signal shift start/end,
lunch start/end, OT start/end, etc.
Press Enter to enter program code 00.
Press + or – to edit the Alarm Duration (0-60 sec, Default = 5 sec).
Press Enter to select the Alarm# (press & hold Enter to advance through
Alarms 01-25. It takes 3 sec. to cycle through each alarm).
Press + or – button to edit the Hour.
Press Enter to set the Hour.
Press + or – button to edit the Minute.
Press Enter to set the Minute.
Press Clear to set the alarm to go off every day of the week (by default the alarm is set for all week
days & the weekend)
Note: Pressing Clear will set the alarm for all days, automatically sets both alarm types and goes to
next alarm#.
or
Press – to cancel selected (flashing) day (press “Enter” to continue advancing through each day of the
week).
Press + to add a day that has been deleted.
Press + or – to edit the Alarm Type.
00 01 = Internal Alarm
00 02 = External Alarm
00 03 = Internal + External Alarm
Press Enter to set the Alarm Type.
Press Mode to advance to the next programming mode (B003). To exit programming mode slide the
switch on the back of the clock to “Run”.
Note: see Section #17 “Connecting External Signal Devices” for more information on how to connect bells
and horns to the ATR120.
Program Mode b002
Alarm#
Hour
Min
SUN MON TUE WED THU FRI SAT
Alar
m Duration
Code