User Manual

User’s Manual, Nimbie Chorus NBCH07 Version 9E1
FREQUENTLY ASKED QUESTIONS
Why is my duplication failure r ate so high?
• Try a lower writing speed using the software.
• Use a different brand of blank discs.
• Check the power source.
Why do my discs get stuck in the disc loader during the
duplication pro cess?
• Check to see if the disc is the standard size (120mm).
• Make sure discs are level in th e loa der.
• Reduce the quantity of discs per load. Some discs may bend from the
weight of the discs placed on top of them.
• Use a different brand of blank discs.
Why won’t the power switch work all the time?
• Allow a 30 second inte rval when switchin g the pow e r o n and off.
Why does the disc loader fail to pick up the disc?
• Check to see if the disc is the standard size (120mm).
• Make sure the discs are not bent or damaged.
Why is the disc loader dropping two or more discs at a time?
• Check to see if the disc is the standard size (120mm).
• Make sure the discs a re level when inserted.
• Separate or loosen the discs from each other before use.
• Use the same brand of discs. Do not mix disc types or brands.
• Reduce the quantity of discs per load. Some discs may bend from the
weight of the discs placed on top of them.
• Use a different brand of blank discs.
How can I restart or reset the Nimbie Chorus System when it is
not working prop erly?
• Turn the power switch to the Off positi on and back to the On position after
waiting 30 seconds. If this does not solve the problem, please contact
your dealer or authorized service center.
38 @ 2010, Acronova Technology, Inc.