User Manual

User’s Manual, Nimbie Chorus NBCH07 Version 9E1
GET STARTED AND INSTALLATION
The Nimbie Chorus is an e xpandable disc dupl ication system which consists
one Master unit and up to seven Client units. You ma y start wit h one Master
and one Client, and plug-in additional Client units when more production
power is required.
Note:
It is not necessary to follow the Client number sequence. You
may connect th e Client unit to any ava il able NimbieCable
connectors on the Master unit. To help with identification, it is
recommended to label each Client unit with the corresponding
number as it is connected to the Master unit.
Finding a Place for the Nimbie Chorus System
The NBCH07 Master unit and its Client units should be placed on a fairly
leveled surface, firm enough to support all the units.
The Client unit should be placed close to the Master unit at a distance
reachable of NimbieCable. For identification purpose, it is recommended to
arrange the Client units in a sequence in which they are connected to the
Master unit.
Note:
Do not expose the system to direct sunlight or high humidity, as it
may cause the system to malfunction.
Nimbie Chorus System Installation
Follow th e s teps below to complet e th e Ni m bie Chorus System insta l lation:
1) Make sure the power switch on th e Master unit is turned off.
2) Make sure the voltage setting on the rear panel of the Master unit is
properly set.
Warning:
An incorrect voltage power supply may damage the unit, the
system, or may result in poor quality discs.
3) Place the Master unit and Client units side by side on a leve led surface.
12 @ 2010, Acronova Technology, Inc.