User guide

After logging in the Acronis vmProtect you will see a welcome screen with the Dashbord's Quick

Start. The three buttons of this section will give you a hint of what to start with:

 First of all, to be able to perform the first backup task of a Virtual Machines, you have to go to

the ESX Host section (p. 75) and specify the IP address / hostname and credentials for the

vCenter or individual ESX host where these machines are running.

 Setting up an ESX host will not bind the licenses to it automatically. Therefore, you have to follow

to the Licenses page (p. 71) to set up your licenses.

 After setting up your ESX hosts and licenses, you can run the New backup task wizard (p. 23),

which will guide you through all the steps of the backup process.

5.1 Dashboard Management

After installing and running Acronis vmProtect (i.e. connecting to Acronis vmProtect component via

web-based console), the default dashboard screen appears. Initially the dashboard contains 2

sections: the Quick Start section and the Virtual Machines section, which presents general

information about your vCenters, ESX(i) hosts, the number of machines managed on the ESX(i) hosts

and the number of mounted virtual machines. The Dashboard view will be changed from the initial

(Quick Start) view after there is a backup task created. As a result of this change, the Quick Start

section will disappear and the additional sections (described below) will be added.

The main workspace area of the Acronis vmProtect dashboard shows an overview of all currently

running tasks or the last finished task details if there are no running tasks. The dashboard is designed

to be the most user-friendly environment for presenting summary information about the current