User Guide

Acronis True Image Server User’s Guide Transferring system to a new disk

On all screenshots below dama

ed partitions are marked with a red circle with a white cross

inside in the upper left corner. Before you start clonin

you should check such disks for errors

using corresponding OS tools.

7.2. Security

Note the following: if lights go out or you accidentally press RESET during the

transfer, the procedure will be incomplete and you will have to partition and format

or clone the hard disk again.

No data would be lost on the old disk though; they were only being read (no

partitions are changed or resized).

Nevertheless, we don’t recommend you to delete data from the old disk until you

are sure it is correctly transferred to the new disk, PC boots up from it, and all

applications work.

7.3. Executing transfers

Selecting transfer mode

You will see the Select transfer mode window just after the welcome window.

Transfer mode selection

We recommend using automatic mode as suitable for most cases. The manual

mode can be helpful, if you need to change disk partition layout.