User`s guide

59 Copyright © Acronis, Inc., 2000-2010
If the free space becomes less than the specified value while the backup is being run, the program
will display the same message and you will have to make the same decisions.
To set the free disk space threshold:
 Select the Show notification message on insufficient free disk space check box
 In the Size box, type or select a threshold value and select a unit of measure
Acronis True Image Home 2011 Netbook Edition can monitor free space on the following storage
devices:
 Local hard drives
 USB cards and drives
 Network shares (SMB/NFS)
The message will not be displayed if the Do not show messages and dialogs while processing (silent mode)
check box is selected in the Error handling settings.
This option cannot be enabled for FTP servers and CD/DVD drives.
E-mail notification
You can specify an e-mail account that will be used for notifying you of the backup process.
To specify the e-mail settings:
 Select the Send e-mail notifications about the operation state check box.
 Enter the e-mail address in the E-mail address field. You can enter several e-mail addresses in a
semicolon-delimited format.
 Enter the outgoing mail server (SMTP) in the Outgoing mail server (SMTP) field.
 Set the port of the outgoing mail server. By default the port is set to 25.
 Enter the user name in the User name field.
 Enter the password in the Password field.
 If you want the client e-mail program to handle messages according to the set policy, for
example, to put messages into the specified folder, specify the subject in the Subject field.
 If your Internet service provider requires authorization on the incoming mail server before
sending e-mails, select the Log on to incoming mail server check box, then enter the name of the
POP3 server and set the port of the incoming mail server.
 To check whether your settings are correct, click the Send test message button.
Additional notification settings:
 To send a notification concerning process completion, select the Send notification upon
operation's successful completion check box.
 To send a notification concerning process failure, select the Send notification upon operation
failure check box.
 To send a notification with operation messages, select the Send notification when user
interaction is required check box.
 To send a notification with full log of operations, select the Add full log to the notification check
box.