User`s guide
121 Copyright © Acronis, Inc., 2000-2010
check box will let you perform a missed operation when the USB flash drive is attached if it was
disconnected at the scheduled time.
Run the backup upon HDD alarm (available when Acronis Drive Monitor is installed) – if enabled,
the backup will run as soon as there is an alarm on Acronis Drive Monitor about a potential
problem with one of the hard disks in the backup source. Acronis Drive Monitor is a hard drive
health monitoring utility based on information received from hard drive S.M.A.R.T. reports,
Windows logs, and its own scripts.
Having finished scheduling, click OK.
In this section
Daily execution parameters ................................................................... 121
Weekly execution parameters ............................................................... 121
Monthly execution parameters ............................................................. 121
Upon event execution parameters ........................................................ 122
6.5.1 Daily execution parameters
You can set up the following parameters for daily operation execution:
Start time or periodicity
If you select At, set the operation's start time. Enter hours and minutes manually, or set the
desired start time using the up and down buttons. You can specify several start times by
clicking Add.
If you select Every, choose daily operation periodicity from the dropdown list (for example,
every 2 hours).
Description of the Advanced settings see in Scheduling (p. 120).
6.5.2 Weekly execution parameters
You can set up the following parameters for weekly operation execution:
Week days
Select the days on which to execute the operation by clicking on their names.
Start time
Set the operation's start time. Enter hours and minutes manually, or set the desired start time
using the up and down buttons.
Description of the Advanced settings see in Scheduling (p. 120).
6.5.3 Monthly execution parameters
You can set up the following parameters for monthly operation execution:
Periodicity or dates
If you select Every, choose a numeral and the day of the week from the dropdown lists
(example: First Monday - the operation will be performed on the first Monday of every
month)