Datasheet

Table Of Contents

5. Set (or change) the MAC address for each computer. To do so, select the computer,

then select on the sidebar Computer details -> MAC address: Set or Change and type

the hex MAC address as XXXXXXXXXXXX or XX-XX-XX-XX-XX. The program will test the

MAC address for validity and display the test result.

6. Hide computers that you do not wish to browse or make a hidden computer visible. To

hide a computer, select it, then select on the sidebar Computer details -> Visibility:

Hide. To make a hidden computer visible (and monitored), enable Show hidden

computers in the Filter group, select the hidden computer, then select on the sidebar

Computer details -> Visibility: Unhide.

7. Create a group backup task for several remote computers at once (see

4.4.2

Creating new group tasks

8. Connect to a remote computer to see the operation log, start or edit tasks for this

computer etc. (see

4.3 Managing a single remote computer

). To do so, select a computer

and click Connect.

9. Switch to the Group tasks management window for managing group tasks.

4.4.2 Creating new group tasks

You can create a disk/partition backup task or archive validation task for several remote

computers at once. File-level backup for groups of computers is unavailable.

1. In Group status or Group tasks management window, select New Group Task

on the toolbar. The Create Group Task Wizard starts to guide you through the task

creation procedure.

2. Select the type of the task: backup or validation.

3. Form a group for the current task: check computers in the list of remote computers.

4. For the backup task only: Select disks/partitions to backup. You can select any

combination of hard disks (by number, according to Windows numeration) and partitions

(by letter); or All hard disks. This setting is applied to every computer in the group, so

having a standard (similar) disks/partitions layout on remote computers would be a plus.