Datasheet

/harddisk:[disk number]
Specifies the hard disks to convert by numbers. For each disk, a
separate virtual disk will be created.
By specifying
/harddisk:DYN
you will convert all dynamic volumes that present in the system.
/vm_type:[vmware|esx|Micro
soft|parallels]
The type of the virtual machine to which the virtual disk will be
added.
/ur
Use when converting image of a disk, containing Windows, and the
resulting virtual disk is supposed to be bootable. With this key, the
program will add drivers, necessary for the virtual machine type
selected with
/vm_type key, to the resulting virtual disk. If the
image was taken from a virtual machine of the same type, normally
the key is not needed.
Drivers for the virtual machine reside in the storage, defined by the
registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\UniversalRestore\Drive
rsPackPath. In case the storage has been moved, please change the
key or use the command
/ur_path:[path].
/ur_path:[path]
The same as /ur with custom path to the virtual machine drivers
storage.
list
/filename:[file_name]
With this option, the image contents is displayed.
When listing image contents, partition numbers may not coincide
with those in the drives/partitions list, if the image does not contain
all the disk partitions. For example, if the image contains partitions
2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the
deploy /partition command cannot find a partition in the
image by its physical number, use
/
partition:<number in the
image> /t
a
rget
_
partition:<physical number of the target
partition>
keys. For the above example, to restore partition 2-5
to its original place use:
/partition:2-2 /target partition:2-5.
explore
/partition:[partition
number]
Specifies a list of partitions to be mounted as virtual drives. Without
this option, all partitions stored in the image will be mounted.
To obtain the partition number for this option, list the image
contents with the
/list/filename command an use the number
from the Idx column.
/letter
Assigns letters to the mounted drives. This option is used with
/partition option only.
unplug
/letter:X
Specifies the virtual drive to be disconnected by letter.
/letter:all
Disconnects all virtual drives.
asz_create
/harddisk:X
Specifies the hard disk number where the Acronis Secure Zone will
be created.
Copyright © Acronis, Inc., 2000-2007 143