Quick Start

5. Enter three IP addresses, separated by a space, for the three nodes that will run the MDS role.

These must be the addresses within the same subnet of the Acronis Storage private network.

6. Enter an IP address that will be used for the web console access. This must be an address within

the Acronis Storage private network.

7. Select the Acronis Storage redundancy mode. The following modes are available:

 Advanced mode

 Express mode

 Evaluation mode

For information about redundancy modes, refer to "Acronis Storage redundancy modes" (p. 3).

8. Once the deployment is completed and the services have started, the web console address in the

Acronis Storage private network is displayed.

You can now log in to the Acronis Storage web console and use the default credentials:

 Login: admin

 Password: Acron1$ (case-sensitive)

Note To improve the security of your Acronis Storage system, we recommend changing the web console access

credentials immediately after the first login, in Settings > Access control.

6.2 Booting up other nodes

In this step, you will boot up the remaining nodes to enable assigning Acronis Storage roles to them.

1. Open the web console in a browser, by using the IP address from the previous instructions.

2. Log in with the default credentials:

 Login: admin

 Password: Acron1$ (case-sensitive)