4.0

Table Of Contents

be 100 GB and 200 GB in size, respectively. If either volume contains too much data to be

reduced to the respective size, the deployment will fail.

§ As in the master image: Each deployed volume will have the same size as in the master image.

Any excess available space on the target disk will become unallocated. If the target disk does not

contain enough available space for placing the volumes, the deployment will fail.

Settings preference

The Settings preference setting determines whether individual deployment settings of a machine (p.

122) can override the deployment settings in the template.

When the Settings preference setting is enabled and you set up an individual setting for a machine,

deployment to that machine will be performed with the individual setting, ignoring the

corresponding setting in the template.

When the Settings preference setting is disabled, deployment to all machines will be performed with

the settings in the template, ignoring any individual settings.

Machine name and membership

This setting determines the machine names, also known as NetBIOS names, of the target machines; it

also determines the name of the workgroup or the Active Directory domain to which the target

machines will be added after the deployment.

The preset is: The same name and membership as those of the machine in the master image