User guide

Table Of Contents

 Specify a range of static IP addresses, a subnet mask, and a default gateway for the target

machines. You may want to use this option if your network does not have the DHCP capability.

Each machine will be assigned an IP address from the range. Make sure that the range is big

enough. If there are more target machines than IP addresses in the range, deployment to the

remaining machines will fail.

TCP/IP properties

If you have not selected to preserve the network settings of the master system settings, you can

specify the DNS server. You can specify the IP address of the DNS server, such as 192.168.0.1; or the

network name of the DNS server in Host name and Domain name, such as dns and example.com

respectively if your DNS server is dns.example.com.

You will be able to change the network settings later when you start the operating system on the

deployed machine.

User accounts

This setting determines the local user accounts that will be created on the target machines in

addition to the accounts that exist in the master system.

Each user account can be added to the Administrators, Power Users, or Users group. Here you have

an opportunity to add a unified administrator’s account to all the systems, if needed. The Remove

and Remove all buttons are provided to remove the accounts you specified.

The password complexity has to meet the password policy set for the master machine. To view or

edit the password policy on the master machine:

1. Click Start -> Control Panel -> Administrative Tools -> Local Security Policy.

2. Under Account Policies, click Password Policy.