Operation Manual

Pre-deployment operations

3. A dialog box comes up suggesting that you configure Acronis Master

Image Creator.

Figure 13. Acronis Master Image Creator configure prompt

If there is no DHCP (Dynamic Host Control Protocol) server in your network,

the master computer will not be able to connect to the network automatically

after booting Acronis Master Image Creator. If you want to create a master

image on a network share, enter the Acronis Master Image Creator

configuration menu by clicking Yes in a prompt window that comes up at boot

time. Then enter the master computer’s IP address and other settings

necessary for connection.

Figure 14. Acronis Master Image Creator configuration: network settings

If Acronis Master Image Creator was configured to start automatically after several

seconds, the configuration prompt will disappear in a short time.

4. When Acronis Master Image Creator starts, it displays the Master Image

Creator welcome window: